Product Description
Motorized Hydro Pressure Test Pumps
Applications :
- Boilers
- Pressure Vessels
- C.i. Mains
- Castings Parts
- Gas Cylinders
- Pipes and Tubes Parts Subjected to Hydraulic Pressure Standard Accessories
- M.s. Fabricated Pail
- Brass Foot Valve
- G.m.j.s.s Check Valve
- Brass Pressure Release Cock
- Pressure Hose With Attachments
- Pressure Gauge
- Pressure Gauge for Testing Up to 705 Kg/cm2 (10,000 Ps.i.)
Performance Range :
- Test Pressure Up to 1000 Kg/cm2
- Water Flow Capacity Up to 150 Lph
- Motor Up to 7.5 Hp
Product Details :
PUMP MODEL |
PRESSURE KG/CM2 |
CAPACITY IN LPH |
MOTOR HP |
MOTOR RPM |
HT-70 |
70 |
100 |
1.0 |
1440 |
HT-140 |
140 |
100 |
1.5 |
1440 |
HT-210 |
210 |
95 |
2.0 |
1440 |
HT-350 |
350 |
90 |
3.0 |
1440 |
HT-500 |
500 |
80 |
5.0 |
1440 |
HT-700 |
700 |
80 |
5.0 |
1440 |
HT-1000 |
1000 |
35 |
7.5 |
1440 |
Special Features :
- Electric Motorized Driven System
- Totally Enclosed Drive Mechanism
- Heavy Duty Precision Gear Box
- Industrial Grade
- Self Oiling System Quick Acting Relief Valve
- Totally Dependable, Reliable and Efficient Performance.
Standard Accessories :
- Pressure Release Cock Made From Brass Metal
- Discharge Pressure Hose With Attachment of Bsp Length 2 Mtrs.
- Stainless Steel Glycerin Filled Pressure Gauge With 4 Dial
- Suction & Discharge Valve (Nrv) Made From Stainless Steel 410 Material
- Pressure Set Valve Made From Stainless Steel
- Pump Air Chamber Made From Mild Steel
- Pump Stand Made From Mild Steel 3 X 1 C Channel
Optional Accessories :
- Water Tank With Water Capacity of 50 Liters 7 Made From Mild Steel Metal
- Suction Hose With 1mtrs Long
- Pump Trolley With Four Wheels
- Pulley Guard Made From Mild Steel
Material of Construction :
- Crankcase :- Made of Close Grain Cast Iron Body With Top Inspection Cover Which Makes the Entire Crank Mechanism Easily Accessible for Maintenance Inspection and Spares Replacement. Heavy Duty (Bull Dozer Type) Construction Provides Practically Vibration Free Operation Bringing Long Trouble Free Performance.
- Gering :- Heavy Duty Hob Cut Gears With Eccentric, Running on en-8 Shaft Built in Reduction Gear Drive With M.s.pinion and Shaft.
- Bearings :- the Drive Shaft is Supported by Ball Bearings.
- Lubrication :- Splash Lubrication is Maintained by Gears Splashing Up Oil From Sump.
- Plunger :- Harden & Ground Plunger Offers Corrosion & Abrasion Resistance and Permits Long Life.
- Valve Body :- Heavy Duty M.s. Body With G.m. Working Parts is Specially Designed for High Pressure Working. The Passages Allow Branching and Merging of Suction and Discharge Flows With Minimum Losses.
- N.r.v. Valves :- Ss or Gm Valves. Valve Seats, and Springs Are Practically Free From Corrosion and Can Without Fatigue.
- Cylinder :- M.s. Fabricated for Heavy Duty Service.
- Seals :- Synthetic Rubber Seals Are Used Fir Leak Proof and Long Working Life.